Hydraulic NC Control Press Brake
JAY SHAKTI 'OPEN BACK PNEUMATIC "C" FRAME STEEL BODY SUPER RIGID POWER PRESS FIXED & INCLINABLE
"JAYSHAKTI" Presses are available in capacities of 10 Tons to 250 Tons Single Geared "Pneumatic" Type Models
| Frame :- | Frame is of robust fabricated steel construction of rigid & interlocked design. It is strain-free and supports the ram and bed. Pneumatic Clutch & Combined Brake Linked with the flywheel engages every time when the foot switch or both hand is Pressed. |
| Cranck Shaft :- | It is made of special EN8 high tensile steel machined and ground to highest degree of accuracy. |
| Bearings :- | Bush Bearings of high grade Gunmetal machined to almost grade of accuracy with provision of oil grooves to ensure a proper fill of oil lubricant for smooth running of the machine in all conditions. |
| Knock Out :- | Presses above 10 Tons capacity are fitted with knock-out Brackets for stopping down the parts drawn,thus facility the work. |
| Ram :- | Ram is of rigid construction of high tensile cast iron/cast steel with round die shanke hole and clamp.It can be tightend by means of the screws on the side.The slide can be adjust the stroke as desired with out hit and trial method. |
| Stroke :- | Power presses are manufactured with adjustable stroke. Amultiple Claw Sleeve with graduation is provided to get the required adjustment in the Stroke.Operator can adjust the stroke as desired without hit and trial method. |
| Fly Wheel :- | Made of high grade C.I. and designed to generated the maximum energy. |
"We also manufacture any type of power presses as per your requirement in any capacity"
TECHNICAL SPECIFICATION
| CAPACITY | 10 | 20 | 30 | 40 | 50 | 60 | 75 | 100 | 150 | 200 | 250 |
| Crank Shaft dia | 63 | 76 | 83 | 95 | 101 | 108 | 121 | 134 | 145 | 160 | 170 |
| Stroke Adjustment | 06-50 | 13-76 | 13-89 | 13-95 | 13-102 | 13-102 | 13-115 | 13-127 | 13-152 | 13-165 | 13-165 |
| Max. Dist Bolster To Ram (SUAU) | 215 | 255 | 300 | 375 | 400 | 440 | 480 | 505 | 610 | 710 | 750 |
| Slide Adjustment | 25 | 38 | 38 | 38 | 45 | 45 | 45 | 51 | 51 | 51 | 63 |
| Slide face (FB x LR) | 101 x 260 | 140 x 310 | 165 x 330 | 170 x 365 | 210 x 380 | 210 x 380 | 235 x 450 | 280 x 560 | 315 x 600 | 340 x 625 | 360 x 700 |
| Punch Hole(Dia x Deep) | 25 x 45 | 32 x 50 | 38 x 65 | 45 x 76 | 51 x 85 | 51 x 85 | 55 x 95 | 63 x 102 | 63 x 110 | 63 x 110 | 63 x 110 |
| Throat distance | 127 | 152 | 178 | 203 | 260 | 280 | 292 | 318 | 369 | 420 | 450 |
| Size Of Table(FB x LR) | 254 x 430 | 305 x 508 | 355 x 558 | 405 x 660 | 520 x 750 | 560 x 787 | 585 x 863 | 635 x 1016 | 737 x 1016 | 840 x 1118 | 900 x 1150 |
| Opening in the Table Dia | 76 | 102 | 127 | 190 | 203 | 210 | 222 | 228 | 242 | 260 | 275 |
| Bolster thickness | 60 | 70 | 70 | 76 | 76 | 82 | 89 | 102 | 102 | 115 | 127 |
| Height of table surface From Floor | 720 | 750 | 750 | 775 | 775 | 800 | 850 | 825 | 850 | 850 | 850 |
| Fly Wheel Dia | 405 | 508 | 558 | 660 | 762 | 838 | 914 | 991 | 1118 | 1270 | 1320 |
| Stroke Per Minute | 70 | 45 | 40 | 35 | 35 | 45 | 45 | 45 | 35 | 32 | 30 |
| Electric Motor (H.P. / RPM) | 1/1440 | 2/1440 | 3/1440 | 5/1440 | 5/1440 | 7.5/1440 | 10/1440 | 10/1440 | 15/1440 | 20/1440 | 25/1440 |
| Air Pressure (Kg./cm2) | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 |
| App. Overall Size FB x LR x HT |
850 x 635 x 1450 | 975 x 735 x 1650 | 1075 x 825 x 2050 | 1350 x 1025 x 2550 | 1450 x 1150 x 2725 | 1550 x 1225 x 2850 | 1730 x 1400 x 3250 | 1905 x 1550 x 3525 | 2110 x 1760 x 3785 | 2385 x 2020 x 4125 | 2450 x 2100 x 4350 |
| Weight(Approx) | 900 | 1600 | 2200 | 3000 | 3500 | 4000 | 5500 | 7000 | 9000 | 11000 | 14000 |
| Power Supply :- | * 400/440 Volts, 3 Phase, 50 Cycles. * All dimensions are in mm. * Electricals are not under Warranty. * Through our technical department continual Devlopment, Variation in size and performance are subject Without prior notice. |